Dispenser also comes with two temperature sensors, called Thermostat and two indicator lights red and green, to red color that is dispenser is in the heating process while the green color that is dispenser in a standby state (heater 0ff).
Dispenser mounted on the tube heater / heater and temperature sensor or thermostat that serves to limit the heater did not work so constantly that will cause the water temperature in excess dispenser tube, when the temperature of the water that is heated by the heater reaches a certain temperature that exceeds the working temperature sensor / thermostat then the sensor will work and decide the current flowing to the heater, the heater will stop working so that the water temperature is maintained in accordance with the requirements, can be seen in the red indicator light will change from green color.
Heater will work again when the water temperature in the tube down until the temperature is below the working temperature sensor, the sensor is installed in series with the heater, thus the function of the sensor is similar to the switch, only works automatically based on changes in temperature.
