For those who have recently had the water dispenser or who had difficulty in putting gallons of bottled water (bottled water) gallons can try these tips. Gallons of water poured into the dispenser is tricky because it takes skill and power as well so the results are not neat and clean spilling water everywhere.
This method can be used to brand gallons of bottled water for everything. In general, can be used for various types and brands of dispensers.
How to / Step / Reload Phase In Drinking Water Dispenser:
- Open gallon outer plastic seal. Do not buy a gallon of bottled drinking water that is no guarantee seal to keep it original, not refill with water.
- Wash with clean water around the bottle neck gallons from top to bottom gallons gallons if necessary (not mandatory).
- Open the seal gallons a direct part in contact with water.
- Open the cleaning wet tissue supplied by the seller gallons of drinking water (must be asked if you buy a gallon of water). Wet tissue to wipe the neck of a gallon starting from the top to the bottom of the neck.
- Closed special tool gallons a perforated cover down the middle, but no lid (usually a bonus when purchasing or can be purchased at nearby shops. This tool helps us to put water functions so as not to spill. If no, we can use the last gallon lid seal but it made us open perforation in the middle so as not to spill with a sharp object.
- Pick up a gallon and pour into dispenser carefully gallon slowly so not to fall due to heavy and bulky. One hand holds the neck of gallons and the other hand holds down a gallon. If you are not strong can be removed together with others.
- Clean gallon with wet paper towel was used on parts that have not rubbed a wet tissue to clean evenly. Gallon bottle cap bottled water dispenser was in a cloth cover that is usually made of cloth to make it look nice and clean. Then clean the area around the dispenser that looks dirty and also dispose of any rubbish and keep the cleaning tools in a good place.
Good luck and always smoothly
